Food Processing with MetSource
Food Processing equipment manufacturers demand intricate shaping, fine surface finish and high alloys to meet Industry standards. MetSource has supplied numerous products to Food Processing manufacturers for years including bushings, centrifuge bowls, mixing impellers, forming dies and wear components.
A very common application in Food processing is the conversion of a fabricated assembly into a single piece investment casting. Please contact us if you wish to discuss a possible component for conversion.
Typical Process Equipment Products:
300 Series Austenitic grades
400 Series Martensitic grades
ASTM Heat Resistant grades
ASTM Corrosion Resistant grades
Nickel and Cobalt based
IN600®, IN625®, IN718®
Hastelloy C-276®, Waspaloy®
254SMO, Ferallium 255®
C93200 to C94500
C95200 to C95400
C95500 to C95800
2035, 6151, 6061, 7075
Ferralium® is a registered trademark of Langely Alloys for a super duplex stainless steel alloy
Inconel® is a registered trademark of Special Metals Corporation for a family of austenitic nickel-chromium based superalloys
254 SMO® is a registered trademark of Avesta Sheffield for a an austenitic stainless steel with molybdenum addition
Bearium® is a registered trademark of MetalTek International
Nitronic® is a registered trademark of AK Steel Corporation (Armco Steel) for a series of alloys with the addition of Nitrogen
Hastelloy® is a registered trademark of Haynes International for a series of corrosion-resistant alloys
Waspaloy® is a registered trademark of Haynes International for a nickel-based superalloy
Near Net-shaped Sand or Centrifugals
ISO 9001:2008 (QMS)
PED (Pressure Equipment Directive)
Customer-specific standards or requirements
Do you have a complicated machined hog-out or fabrication that may lend itself to conversion to an alternate process? Many of MetSource’s success stories are centered around converting a product from one process or multiple processes to a streamlined manufacturing process that improves the product Quality, Cost and / or Lead-time.
Material Process Selection
Do you have a part design but want a Solutions expert to advise optimal process to produce your part? Subtle changes in part design can optimize process manufacturability to reduce cost, increase part quality and / or increase throughput.
Do you want to speak to a Metallurgist regarding a part and environment to help with material selection? Alloy selection can greatly affect overall cost and part manufacturability.
On-Site Visit and / or Phone Consultation
Do you wish to have a MetSource Engineer call or visit you to discuss a particular application?